Click to enlarge
Previous product
Suntree Distribution Box STSM-12MAP ₵26.50
Back to products
Next product
Suntree SRD-30 ₵17.50

Suntree AC SPD 4P 420V 20KA/40KA

₵81.00

SUP1 AC SPD is suitably used in the TT, TN-S, TN-C, IT, TN-C-S and etc power supply system of AC 50/60Hz,<380V, installation om the joint of LPZ1 or LPZ2 and LPZ3, it is designed according to IEC61643-1, GB18802.1, it adopts 35mm standard rail, there is a failure release mounted in the module of surge protection device. When the SPD fails in breakdown for over-hart and over-current, the failure release will help electric equipment separate from the power supply system and give the indication signal, green means normal, red means abnormal, it also could be replaced for the module when has operating voltage.

Compare
Add to wishlist
Categories: , Tags: ,
Description

Product Details

In our years of brand development history, we have insisted on building the excellent performance of Single Phase Surge Protection Device, Type 1 AC Surge Protection Device, PV SPD with leading technological strength. Our team is united, pragmatic and forward-thinking, and our development is inextricably linked with the care and accompaniment of all clients and partners. With more than ten years, our company have been adhering to the ‘integrity management, quality first business philosophy, and has grown in the fierce competitive market.

275V AC SPD The lower the clamping voltage (a protection voltage measured after the lightning protection passes through the energy discharge or discharge), the better the protection performance. It has three protection levels of 300V, 400V and 500V, usually clamped Voltages above 400 volts are very high. Therefore, it is necessary to observe the clamp voltage value to ensure safe use.

After all, when choosing a surge protector, the family should recognize the brand and understand its various aspects of performance. Kejia Electric has been focusing on lightning protection for 20 years, and its products have passed the safety inspection of the lightning protection center, and the production process is checked layer by layer. To keep your home away from lightning strikes and protect home electronic equipment and personal safety.

Specifications

Technical Parameters
Pole 1P 2P 3P 4P
Rated Operating Voltage Un(V~) 230V/275V 385V/420V
Maximum Continuous Operating Voltage Uc(V~) 275/385/420VAC
Voltage protection Level Up(V~)kV ≤2.5
Nominal Discharge Current ln μs kA 5 10 20 30 40 60 80 150
Maximum Discharge Current lmax μs kA 10 20 40 60 80 100 150 200
Response Time (ns) <25
Test Standard IEC61643.1, GB18802.1
Operating Environment(centigrade) -40℃ ~+85℃
Max Connection Line 35mm2 hard wire/35mm2 strand wire copper line
Recommended Connection Line 16mm2 hard wire/25mm2 strand wire copper line
Installation Standard Rail 35mm
Material of Outer Covering Burning-proof Nylon

Suntree SPD Surge Protection Device AC 40ka 275V 380V 420V 4 Pole Electric Surge Protector

275V AC SPD The lower the clamping voltage (a protection voltage measured after the lightning protection passes through the energy discharge or discharge), the better the protection performance. It has three protection levels of 300V, 400V and 500V, usually clamped Voltages above 400 volts are very high. Therefore, it is necessary to observe the clamp voltage value to ensure safe use.

Product Details

In our years of brand development history, we have insisted on building the excellent performance of Single Phase Surge Protection Device, Type 1 AC Surge Protection Device, PV SPD with leading technological strength. Our team is united, pragmatic and forward-thinking, and our development is inextricably linked with the care and accompaniment of all clients and partners. With more than ten years, our company have been adhering to the ‘integrity management, quality first business philosophy, and has grown in the fierce competitive market.

275V AC SPD The lower the clamping voltage (a protection voltage measured after the lightning protection passes through the energy discharge or discharge), the better the protection performance. It has three protection levels of 300V, 400V and 500V, usually clamped Voltages above 400 volts are very high. Therefore, it is necessary to observe the clamp voltage value to ensure safe use.

After all, when choosing a surge protector, the family should recognize the brand and understand its various aspects of performance. Kejia Electric has been focusing on lightning protection for 20 years, and its products have passed the safety inspection of the lightning protection center, and the production process is checked layer by layer. To keep your home away from lightning strikes and protect home electronic equipment and personal safety.

Specifications

Technical Parameters
Pole 1P 2P 3P 4P
Rated Operating Voltage Un(V~) 230V/275V 385V/420V
Maximum Continuous Operating Voltage Uc(V~) 275/385/420VAC
Voltage protection Level Up(V~)kV ≤2.5
Nominal Discharge Current ln μs kA 5 10 20 30 40 60 80 150
Maximum Discharge Current lmax μs kA 10 20 40 60 80 100 150 200
Response Time (ns) <25
Test Standard IEC61643.1, GB18802.1
Operating Environment(centigrade) -40℃ ~+85℃
Max Connection Line 35mm2 hard wire/35mm2 strand wire copper line
Recommended Connection Line 16mm2 hard wire/25mm2 strand wire copper line
Installation Standard Rail 35mm
Material of Outer Covering Burning-proof Nylon

Overall Dimensions

Our objective will be to research and develop new products, continue to innovate, strive for perfection and deliver better Suntree SPD Surge Protection Device AC 40ka 275V 380V 420V 4 Pole Electric Surge Protector to customers around the world. Building an excellent company culture that suits our company’s characteristics is the foundation for cultivating the company’s core competitiveness. We break down people barriers to ensure you get what you want to the level you expect, when you want it.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Suntree AC SPD 4P 420V 20KA/40KA”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Shipping Rates

Products sold on this website have varying shipping methods and rates depending on vendor, location, weight and size.

Shipping rates will be displayed on the checkout section for each product and applied to the product cost.

Some of the products available on this website are processed and shipped by Wilkins Engineering Limited. Products that are fulfilled by Wilkins Engineering Limited will be stated on the product page and invoice.

Orders fulfilled by Wilkins Engineering Limited will use a shipment tracking service where possible.

Multi-Vendor

Wilkins Engineering Limited is a multi-vendor marketplace.

As such, each vendor / product may have specific shipping rates and delivery times. Please check shipping rates and delivery times at checkout before ordering.

 

General Store Policies

Wilkins Engineering has a general store policy which can be found in our terms and conditions

Related products

Sold out
Compare
Close

Suntree DC SPD

₵40.00
SUP2-PV surge protective device, protect against lightning surge voltages insolar system (photovoltaic power supply system). These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), ely if the line routing is external and long. High energy MOVs equipped with specific thermal disconnectors and related failure indicators.
Add to wishlist
Read more
Quick view
Compare
Close

Suntree AC MCB 100A 4P 6KVA 400V

₵95.00
Add to wishlist
Add to cart
Quick view
Compare
Close

Suntree AC MCB 32A 4P 6KVA 400V

₵30.00
Add to wishlist
Add to cart
Quick view
Compare
Close

2.5sq.mm 1 core 1kV Cu PV Cable

₵5.00
Add to wishlist
Add to cart
Quick view
Compare
Close

Suntree AC SPD 2P 275V 20KA/40KA

₵40.00
SUP1 AC SPD is suitably used in the TT, TN-S, TN-C, IT, TN-C-S and etc power supply system of AC 50/60Hz,<380V, installation om the joint of LPZ1 or LPZ2 and LPZ3, it is designed according to IEC61643-1, GB18802.1, it adopts 35mm standard rail, there is a failure release mounted in the module of surge protection device. When the SPD fails in breakdown for over-hart and over-current, the failure release will help electric equipment separate from the power supply system and give the indication signal, green means normal, red means abnormal, it also could be replaced for the module when has operating voltage.
Add to wishlist
Add to cart
Quick view
Sold out
Compare
Close

Sunny Home Manager 2.0

₵6,000.00
SMA SUNNY HOME MANAGER 2.0 - Intelligent energy management is now easier and more cost-effective The Sunny Home Manager 2.0 monitors all energy flows in the home, automatically identifies potential savings and facilitates efficient use of solar energy. It makes intelligent energy management even easier and more cost-effective by combining the functions of the Sunny Home Manager Bluetooth and the SMA Energy Meter in a single device starting in April 2017. The Sunny Home Manager 2.0 optimizes PV self-consumption and significantly reduces electricity costs. To do this, it measures the power of PV generation, purchased electricity as well as grid feed-in, and gives an overview of all relevant energy flows in the household. By means of local PV generation forecasts and the measured household consumption profile, the self-learning device prompts the user with energy-related action recommendations. Operation of the controlled appliances is coordinated in a way to optimize the use of self-generated solar energy.
Add to wishlist
Read more
Quick view
Compare
Close

Suntree Distribution Box STSM-4MAP

₵13.50
Overall panel design is luxury and attractive. The face covering colors are dark Green and brown (provided according to the color needs of the different interior residential designs except for the standard colors). The design of the face covering gives a noble and elegant feeling. Pure Ivory, high strength, never change color, transparent material is PC. Fixed frame, simple structure and easy Installation.
Add to wishlist
Add to cart
Quick view
Compare
Close

Suntree AC Combiner Box (SHLX-AC6/1)

₵3,850.00
SHLX-ACG/1 AC PV combiner box is applicable to the PV group on power system. It is an important part to undertake series inverter and AC powe「distribution cabinet or a step-up transformer and access up to four sets of photovoltaic group on inverter. Into line with the input of circuit breaker and output line with circuit breaker or the load isolating switch. Bus bar with two levels of lightning protection.Highest rated system voltage is AC690V. IP65 Protection class same a s inverter. Installed outdoor. With waterproof. dustproof, anti UV. anti salt spray corrosion etc. function The combiner box greatly simplifies the connection between series inverter and AC power distribution cabinet or boost transformer. Simple and clear linternal structure make reasonable wiring. High reliability and simple maintenance. Outdoor wall mounted can adapt to the harsh environment. In addition to the material and size, it can be customized according to user requirements.
Add to wishlist
Add to cart
Quick view